Basic Info.
Shell Material
Flame Retardant PC Plastic
Application
Commercial, Industrial, Hospital, Residential/General-Purpose
Transport Package
Carton Box, Paper Pallet
Specification
Input: 100~240V AC 50/60Hz Output: 5VDC 2.4A
Product Description
2.4A Schuko USB Wall Socket
2.1A Wall Faceplate with 2 USB Charging Ports Output: 2 x 1.0mA, 5V or 1 x 2.1A, 5V. 3.4A Wall Faceplate with 2 USB Charging Ports Output: available for more options: 1 x 1.0mA, 5V; 1 x 2.4A, 5V; 2 x 1.0mA, 5V; 1 x 1.0mA+1 x 2.4A, 5V Guarantee that two ports can work at the same time.AVG Efficiency of both Wall Faceplate with 2 USB Charging Portss can be able to reach Energy Star-VI level, Standby Power of Wall Faceplate with 2 USB Charging Ports < 0.1W max , and it can save electrical energy.Wall Faceplate with 2 USB Charging Ports dissipates heat very well, and safety performance is guaranteed. Wall Faceplate with 2 USB Charging Ports has OVP,OTP,OCP,SCP protection functionality. If Wall Faceplate with 2 USB Charging Ports have short circuit, no odor smoke fire plastic deformation and excessive heat happen.Quality assurance:Standard tests show that the use of Wall Faceplate with 2 USB Charging Ports can be achieved 5000 times; When Wall Faceplate with 2 USB Charging Ports works, acoustic Noise.Easy to install, installation plate has groove design, easily strip and splice, simplify the installation and maintenance;Wall Faceplate with 2 USB Charging Ports has fine workmanship, the problem that jack loose leading the equipment can not be charged does not occur.Professional R&D dept and sales team support you with good service of Wall Faceplate with 2 USB Charging Ports
Wall Faceplate with 2 USB Charging Ports plane size is: 84mm*84mm, it can be suitable for European market.Center plane of Wall Faceplate with 2 USB Charging Ports size is: 55mm*55mm,height is 47mm.Wall Faceplate with 2 USB Charging Ports connection diagram.
Flush-type Wall Faceplate with 2 USB Charging Ports for fixed installation |
Input: | AC 100-240V~50/60Hz |
Output: | DC 5.1V 2.1A |
Standby Power consumption: | <0.5W |
Ambient temperature : | -10ºC~50ºC |
Relative humidity : | <95% |
Colour : | White |
Main material : | PC (Halogen free) |
IP-Class : | IP21 |
Fire hazard test : | 650ºC/850ºC(IEC60695-2-1) |
The product complies with the standard(s) : | EN 60669-2-1 |
EN 60669-1 |
The product is in conformity with the provisions of the following European directive(s) : | LVD (2006/95/EC) |
RoHS (2002/95/EC) |
WEEE(2002/96/EC) |
Technical info :
Wall Faceplate with 2 USB Charging Ports makes it possible to charge rechargeable batteries of electronic devices such as mobile phones, iPad, iPod, iPhone or similar, with the charging process taking place exclusively via USB connection.
Two vertical parallel arranged USB jack 2.0 Type A.
Input: 100~240V AC 50/60Hz
Output: 2.1A Type Wall Faceplate with 2 USB Charging Ports: 2 x 1.0mA, 5V or 1 x 2.1A, 5V.
3.4A Type Wall Faceplate with 2 USB Charging Ports: 1 x 1.0mA, 5V; 1 x 2.4A, 5V; 2 x 1.0mA, 5V; 1 x 1.0mA+1 x 2.4A, 5V
Wall Faceplate with 2 USB Charging Ports fit into standard wall boxes from Etman (c-c 60mm). By surface fixing, please use surface house. By surface fixing, in combination with a switch or other regulators/dimmers, please use double surface house .
Thermoplastic center plate 55X55 mm, which fits into Etman "P"series combination plate.
Screw terminal, capacity: 1.5-2.5mm2.
No visible screws.
Wall Faceplate with 2 USB Charging Ports only suitable for use in indoor areas.
Built-in protection circuit.
Wall Faceplate with 2 USB Charging Ports Performance Guarantee:
Fast Transient/Burst SimulatorConducted EMI test systemLightning Surge SimulatorAuto Test SystemTemperature and Humidity testVibration Testing SystemBurn-In (ORT/DMTBF) TestInsert and Extract Tester
We can do ODM and OEM for Wall Faceplate with 2 USB Charging Ports. Package is as per your requirement.You can have your designed inner or outside package with your logo on it.If you need to use your design, we shall send you our dieline for your reference.
| How is your current divided? |
How is your current divided? For example, 2.1A means 1.0A+1.1A? What about the 3.4A?the power between two Wall Faceplate with 2 USB Charging Portss will divide by half (1.7A+1.7A), or it will be: one is 2.4A, another is 1A?
The current shall be divided automaticly by the Wall Faceplate with 2 USB Charging Ports itself.
We have IC Intelligent identification inside. Thus, any option/combination is available if the total current is less than the specification. It can match the current with device automaticly. Also, it is equiped with over-current protection function.
For some low end Wall Faceplate with 2 USB Charging Ports, there is no IC intelligent identification. Althought it is designed to reach to 2.4A, when you charger for Ipad, the tolerant current is still 1.5A, which is far away from the requirement for 2.4A. This shall cause the low speed for charging. On some extreme condition it shall not compatiable for some mobiles, which shall cause unavailable for charging.
| If I don't need the whole product, can I buy the internal compoment? |
We are manufacturer, thus , we can provide both. For the whole SUB socket, our present design is for Schuko. The constructure is not suitable. However, we can provide the compoment unit to better fit.
To Know more price and prodcts details please send Inquiry.
Response Time < 24 Hours
Address:
6th, Miaobanrood, Wuyang Village, Lijia, Wujin, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Arts & Crafts, Electrical & Electronics, Lights & Lighting
Company Introduction:
Etman Electric(Changzhou) Co., Ltd, established in 1 9 9 9, is a professional manufacturer engaged in the research, development, production, sale and service of Switch, plug, socket, electrical products, lamp, wall box, etc. We are located in Changzhou with convenient transportation access for about one hour from Shanghai by train. Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. In recent years, our company has introduced a series of advanced equipment including injection machine, assembling line and inspection line. In addition, we have obtained CE, Semko, VDE certificates. We are a norweigain company with manufacturing base in China. Now we have 9 outlets abroad our products are mainly exported to clients in such countries and regions as Norway, Sweden and Finland. Our market include professional market and DIY market. For establishing business, we don′t aim at receiving order in a hurry, but to develop stably. Finding a partner is just like finding a friend, we know each other, understand and trust, and even can share, both for cultural and economically. We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, feel free to contact with us. Warmly welcome if you have any interest in establishing outlets with us in your market.
){kind=link}